ATLAS Energy Management Systems

automatic energy / resource use data collection
software packages to suit all companies, large or small
analysis of usage to highlight waste and inefficient practices
precise cost allocation to user defined cost centres and supplier bill checking

To the features of the ATLAS Energy Management Systems can be added load modelling and forecasting capabilities.

ATLAS Load / demand control

automatically control site energy use
maintain peak demand below acceptable level
equally applicable to electricity, gas or other resource usage control
8 load control relays to provide very flexible load shedding.

The ETL symbol is a UK registered certification mark of the Carbon Trust.
ATLAS and Profile energy management systems qualify for the Enhanced Capital Allowance Scheme.
See our ETL page for more information.

Profile Portable Energy Recorders

compact and portable unit to record energy use in a circuit
availabe for purchase or hire
system software reports kwh, KVAh, kVArh, current and voltage
safe to use - no live voltage connections
up to 12 weeks data storage
Rogowski coils ranged 0 to 2000A
system automatically ranges to 6, 120, 500 or 2000A

For those not able to justify a permanent energy management system, the Profile is an extremely useful tool.
Use it to monitor the total site electricity usage or machine by machine to identify areas of possible energy efficiency improvement.

Electricity, Resource Meters

kWh & kVAh pulseing electricity meters suitable for use with ATLAS Energy Management system
single phase and three phase meters available
gas and water meters also available
IF-1 current to frequency unit allows convertion of 4-20mA signal to volt free pulse
plug in electricity meter allows monitoring of individual sockets

WebNet Z1 Data Logger

2 channel logger with TCP/IP/GSM/GPRS communication
Integral HTTP server allowing unit configuration through web browsers
CGI query mechanism allows automatic input of data to spreadsheet programs
SMTP & POP3 to allow emailing of data.

Current, Event, Pulse Loggers

Record 3-phase curent, events (on/off, changes of state) or pulses
Compact, easy to install and use
Associated software allows analysis of recorded data
temporary or permanent installations
See µLog page for more information