Energy Monitoring, Electricity Meters & Smart Meters

Plug-in Meters/Monitors Plug in Electricity Meter This compact energy meter plugs directly into a standard (UK) 3 pin mains socket to monitor the electricity use of the equipment connected to it. Unit displays; power consumption (Watts) total consumption in measured period (kWh, user resetable) metered period (hours & minutes) cost per unit (as input by user voltage & frequency (volts & Hz) total cost of power consumed in metered period Priced at £22* incl. VAT delivered UK. Download a leaflet for more information or contact us at webinfo@newfound-energy.co.uk
A wide range of kWh and kVArh pulsing electricity meters and transducers are available for both medium voltage and high voltage circuits. Use in combination with our ATLAS Energy Monitoring systems to create a comprehensive automatic electricity metering system. 3-Phase Electricity Meters A range of simple three-phase and smart meters are available to suit many different requirements. Cube 300/350/400 The Cube range of class 1 meters are provided in standard DIN 96x96 format. Designed for ease of installation and use, it features a 'right first time' installation aid, a large kWh (three line on the Cube 400) display and an isolated pulse output. Equally suitable for both 3 wire and 4 wire 3f unbalanced loads (optionally for single phase or balanced 3f systems), these Meters have been designed to measure accurately irrespective of the type of load - ideal for a motor or heater, or for a modern electronically controlled load. The meter is fitted with large Rising Cage terminals - allowing connection to a wide range of cables from 0.25mm² to 4.0mm². For more information please see the Cube300 or Cube400 leaflet. Cube 400 IP Smart Meter The Cube 400 is available in an IP enabled Smart Meter version which allows the user to connect the meter to a site network. Once installed, the meter measures and logs all the usual information with the added benefit that it can all be viewed remotely using a standard web browser. An IP Smart Meter version of the Cube 350 is also available. For more information please see the CubeIP leaflet.
Rail 350V & Cube 350V The Rail 350V and Cube 350V form a range of meters specifically designed for retro-fit applications. They are supplied complete with specially designed openable current sensors. Easy to fit, and with added measurements to ensure 'Right First Time' installation. Easy to Commission - Right First Time Wiring: With kW & PF displayed at the touch of a button, installations can be quickly and simply tested - connections confirmed & the load measured. Pulse Output: With a Pulse Test facility, pulses can be generated - without any load present - to test all downstream equipment. For more information please see the 350VMeters leaflet.
A1700 Vision Generally supplied as a Class 1 meter the A1700 Vision is a comprehensive electricity meter that can be upgraded to Code of Practice 5 level (OFGEM, MID approved). The meter is also available as class 0.5 and class 0.2 when required. Both 3 and 4 wire models are available. Vision's features include a fully customer programmable 2 line display, the ability to handle complex tariffs and load profile storage for 40 days. The meter can measure kWh Total Import/Export & kVarh Import/Export Leading/Lagging and will also calculate kVAh from these values. The A1700 Vision can be supplied to provide kWh, kVAh and kVArh pulses for use in energy monitoring systems plus a 30 minute synchronisation pulse.
IC910/970/990 3 Phase Meter The IC910 meter is part of a range of low cost electricity meters for 3 phase 4 wire circuits and is the starter meter in the 900 series. Other meters available are the IC970 and IC990. The meter is a 96mm square panel mounting unit and has a large 7 digit Liquid Crystal Display providing a statement of kWh consumed. Volt free contacts provide the kWh pulse required for energy monitoring systems with a value of 1 or 10 kWh depending on the CT ratio. The IC910 is, we believe, the ideal starter meter. For more information a leaflet is downloadable here.
A40 Dual-Pulsing Meter A multi-function panel mounting energy meter the A40 will measure energy in 4 quadrants plus current and voltage harmonics. This meter provides more than just energy consumption information on its display. User configurable the multi-line, back-lit liquid crystal display will provide simultaneously four measurements (e.g. phases and total) plus bar graphs for each phase current. For more information a leaflet is downloadable here.
DIN Rail Mounted & MID Approved D300 single phase meter The D300 is a MID approved DIN rail-mounted single phase 100 Amp direct-connected kWh meter. It is a small compact meter with a pulse output and a large LCD display for monitoring of a circuit on a single tariff. The pulse output can be used with energy monitoring systems such as our ATLAS metering system or a suitable BMS. The D300 has been designed specifically to be fitted into enclosures with a DIN rail inside and could typically be fitted alongside fuses/breakers in consumer units. The size of the meter is 4.25 modules wide, ~53mm. For more information a leaflet is downloadable here.
D500 CT operated three phase meter The D500 is a MID approved three phase four wire DIN rail-mounted programmable kWh meter. It is a single tariff rate, current transformer (-/5A) operated meter with a pulse output and a large LCD display providing the kWh consumption information. The pulse output can be used with energy monitoring systems such as our ATLAS multi-point metering system or a suitable BMS. The meter is 6 modules wide, ~ 75mm. For more information a leaflet is downloadable here.
D234 100 Amp three phase meter The D234 is a DIN rail-mounted 100 Amp three phase four wire class 1 kWh meter with a pulse output and a large clear liquid crystal display that provides the kWh consumption for the circuit. This meter is 6 modules wide, ~75mm. \|This meter is ideal for sub-metering in multi-resident commercial and small office situations and simplicity itself to install. A single phase model with similar specification, the D200 is also available. For more information a leaflet is downloadable here.
Single Phase Electricity Meters ME162 Single Phase Meter The ME162 is a compact low cost single phase surface mount electricity meter ideal for use with ATLAS systems. This whole current, 10-100 Amp, class 1 meter has a liquid crystal display that confirms the cumulative kWh measured. When used with an ATLAS system it provides the necessary kWh consumption pulse for collection by the system logger. Installation is easy for any competent electrician with wiring details provided in the terminal rail cover. A 4 rate tariff structure can be pre-programmed prior to supply. This meter is OFGEM/MID approved and certified. A 3 phase version is also available (the MT171-P) with or without pulse output. For more information a leaflet is downloadable here.
Other Resource Meters Water or Gas To add to the capability of ATLAS consideration should be give to other resources in addition to electricity.Meters from Viterra Energy Services compliment ATLAS electricity meters and will provide the required pulses for consumption monitoring. Full details of these meters are available with costs based on model type, pipe diameter and flow rate. Current to Frequency Converter As some flow meters, steam, water etc, are sometimes provided with a 4-20mA output giving flow rate, a MEV 4-20mA current to frequency converter will give the necessary volt free pulse contacts for connection to ATLAS Loggers. The use of this I/F 1 unit removes the often high expense and disruption of a meter change.